Offers from eBay

Rubber,Protector,Guard,Protector,Rubber,Seals,Moulding,Strip

Car Edge Trim Rubber Seal Protector Car Door Edge Guard Protector Car Rubber Door Seals Car Moulding Trim Strip

$10.28

Description:
This rubber trim can be used on the metal edge between the car door and car body. In the external edge of the car door and more. Strip of window for mini buses. Border for heavy equipment. Lid for sharp metal edges. Vinyl window to the side of boat.

Specification:
Material: Rubber
Colour: Black
Length: 5m
Width: 10mm
Rim Thickness: 7 mm
Taking a range of 1.0mm to 2.5mm

Features:
1. Dimension. 5m(L)* 0.1m(W)* 0.07m(T), grip range is 1.0mm to 2.5mm, grip hard in the car door/boat/glass wall, easy to apply and fits snugly, no need glue or fixings.
2. Effect. Waterproof,Noise Isolation,Corrosion Resistance,High Temperature Resistance,Anti-Aging,UV Resistance.Has good flexibility and resistance to compression deformation, easy to install around those tight corners.
3. Well-designed. Metal strip inside with rubber outside, protect your car door edge from nicks and saved the paintwork on the car. PVC Outer Covering with grip surface pattern,provide a stronger grip.
4. Widely Use. Can be used on the metal edge between the car door and car body. In the external edge of the car door and more. Strip of window for mini buses. Border for heavy equipment. Lid for sharp metal edges. Vinyl window to the side of boat.
5. Easy To Install. Direct replacement. Just push on the rubber seal above the install place.Attention to truck/van owners, please ensure your door edge thickness prior to purchase.

Installation location:
1.The metal edge of the main body between the car door and the vehicle body.
2.In the car door and more of the outer edge.
3.In the window above the car.
4.Window panel minibus.
5.Border heavy equipment.
6.Covering the edge of the sharp metal.
7.Vinyl window decoration boat.

Instructions:
1.Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing.
2.Uncover the tape from the tip of the lining (Ensure the tape is install inside the door).
3.Start from the top, insert the lining onto your door edge until the lining is fully seated.
4.Press the lining with your thumb along the door edge until it is fully seated.
5.Repeat step 4 until all edges are protected.
6.Use scissors to cut away unused lining for other door edges.
7.Let the lining dry up by itself and do not get wet for at least 12 hours.

Package Included:
1 x 5M Rubber Edge trim
1 x Shovel

More Details: